Shenzhen Zhianbao Electronics Co., Ltd.
Main products:Wireless Remote Control,Wireless Transmitter Module,Wireless Receiver Module,Wireless Receiver Controller,Wireless Alarm System
Products
Contact Us
  • Contact Person : Ms. Zhan Jenny
  • Company Name : Shenzhen Zhianbao Electronics Co., Ltd.
  • Tel : 86-755-33075723-801
  • Fax : 86-755-23462824
  • Address : Guangdong,Shenzhen,Rm 1 on 5/F in Bldg A of A.B.C Bldg ,in Shuichan Sanwei Industrial Garden ,Baoan Area
  • Country/Region : China
  • Zip : 518000

wireless long range rf transmitter and receiver

wireless long range rf transmitter and receiver
Product Detailed
*rf transmitter and receiver *professional manufacturer *life time service *Factory price *OEM, ODM accept

Item: wireless long range rf transmitter and receiver ZKAC1

1. Summary

The series of wireless receiver control appliance is small size, stable performance, low power consumption and flexible four output ways determined by the jumper connection, non-locking, interlocking, self-locking, non-locking delay.

2. Encoding way

The receiver is learning type.

3. Working way

a. M4 Signal temporary (non-locking)

Press remote control A button, the corresponding relay actuates, release the button, the relay breaks.

b. L4 signal ( interlocking)

Press remote control A button, the corresponding relay actuates and keeps working, press remote control B button ,the relay breaks and stop to work.

c. T4 signal(self-locking)

Press remote control A button, the corresponding relay actuates and keeps working, press remote control A button ,the relay breaks and stop to work.

d. M4 Signal temporary(non-locking delay)

connect J1 pin – delay 5 seconds,

connect J2 pin - delay of 10 seconds,

connect J3 pin- delay 60 seconds,

connect J1 \ J2 pin - delay 20 seconds, connect J1 \J3 pin- delay 2 minutes,

connect J2 \J3 pin –delay 5 minutes,

connect J1 \ J2 \ J3 pin – delay 10 minutes

Press remote control A button, the corresponding relay actuates and keeps working until the time out.

4. Tech spec:

Working voltageAC220V
Static current≤6mA
Working temperature-20 centigrade - +50 centigrade
Receiving sensitivity-105dBm
Working frequency315MHz /433MHz
Output current≤30A

5. Wiring way:

COM: common port NO:Normally closed, NC:Normally closed

6. Note:

1.Do not operate remote control button fast and frequently, because wireless receiver controller is a microprocessor control system, each operating state has a response time of 1 second.

2. Remote control LED dims or remote control distance is shorter, please replace the battery.

3. Receive antenna length is neither too long nor too short, otherwise it will affect the launch distance, straightened use, and try not to close to metal objects.

wireless long range rf transmitter and receiver



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.